free tracking

general · March 21, 2022 0

Whirlpool Duet Dryer Won't Start Just Clicks

Whirlpool Duet Dryer Won't Start Just Clicks

Whirlpool Duet Dryer Won't Start Just Clicks. Dungcuthethaovn.com to access the start relay in the console, remove the screws on the back of the end caps of the console and you can then lift it off of the top panel. It may be because of power issues, a faulty motor, problems with the start button, a blown thermal fuse, or a defective door switch.

Whirlpool Duet Dryer Won't Start Just ClicksWhirlpool Duet Dryer Won't Start Just Clicks
Whirlpool Duet Dryer Won't Start Here're What You Should from www.homenish.com

It may be because of power issues, a faulty motor, problems with the start button, a blown thermal fuse, or a defective door switch. Push the button in on the door switch with one meter probe on com and the other meter probe on no and see if it reads. Whirlpool dryer won't start just clicks.

Make Sure Your Dryer Is Unplugged!

To access the start relay in the console, remove the screws on the back of the end caps of the console and you can then lift it off of the top panel (with the dryer still unplugged). Push the button in on the door switch with one meter probe on com and the other meter probe on no and see if it reads. Unplug the dryer and bypass the start relay in a similar manner to the thermal fuse to check this component.

It May Be Because Of Power Issues, A Faulty Motor, Problems With The Start Button, A Blown Thermal Fuse, Or A Defective Door Switch.

When the idler pulley breaks it may cause several symptoms, but one common is that the unit will click but not start. You can troubleshoot most of these problems, but if. Several factors may cause your whirlpool duet dryer not to start.

Whirlpool Dryer Won't Start Just Clicks.

Dungcuthethaovn.com to access the start relay in the console, remove the screws on the back of the end caps of the console and you can then lift it off of the top panel. If the belt checks good, you'll need to continue and remove the control panel and front panel of the dryer. Unplug the dryer and look in the bottom front left corner.

See also  How To Dream About Someone Specific

The Idler Pulley On A Dryer Helps Secure The Belt So The Drum Can Rotate Properly.

These tips may help you determine the cause of your dryer problem. There is a little 1 thin flat white plastic device attached to the top of the blower wheel housing with 2 blue wires. You’ll need to access the pulley to see if it’s worn, cracked, or.